Provisioning guides to handsets and other hardware
This guide applies to SNOM and Yealink handsets only and assumes that the handset has been reset to factory defaults This process is recommended only for troubleshooting to check the connection, a han...
The Snom PA1 can be used as both a loud ringer and as a PA system, generally, we will need 2 registrations if the customer wants to use both of these features The PA1 can use Power Over Ethernet (POE)...
Programming the ATA You can plug a standard telephone into either of the PHONE sockets and dial ****110# to access the IP address You can also use a network sniffer like FING to find the MAC address ...
There are two ATA boxes that Vonex supplies the SPA112 is the most common Connect power and Ethernet to the device (does not support POE) You can plug a standard telephone into either of the PHONE so...
The Cisco ATA SPA8000 allows up to 8 SIP Registrations Connect power and Ethernet to the device (does not support POE) You can plug a standard telephone into any of the PHONE sockets and dial ****11...
An i-Serv system can grow from 1 to 40 BaseStations, supporting up to 200 users. Each base station can support up to 30 handsets, with a maximum of 10 active current calls. All handsets are supported ...
The CyberData Intercom Gate Phone allows customers to have an intercom attached to an automatic door, the paging button will be able to call multiple handsets and then the person who answers will be a...
This guide covers the following models: Yealink T41G, T41S, T42G, T42S, T46G, T46S T48S, T48G Yealink has created their own electronic hook switch called the EHS36 which you will need in this inst...
This guide will detail how to connect the Plantronics CS540 headsets on Grandstream Handsets...
This guide covers the following models: Yealink T53W, T54W and T57W It is also compatible with Yealink T41S, T42S, T46S and T48S Yealink has created their own electronic hook switch called the EHS40...