Billion BiPac 8700AXL - ADSL/VDSL

This guide details how to setup the Billion BiPac 8700AXL modem router for the following connection types: ADSL, Fibre to the Node and Fibre to the Building

If the modem detects it is in default mode it will launch a browser page to tell you
The first page will prompt you to change the interface password

You will then be promoted for timezone

Once you have entered the timezone the Easy Sign On or Quick Start wizard will start

Basic Setup

If the modem does not launch a new browser window you can access the interface manually, Vonex reccommends this method for setting up the BiPac series

The interface of the Billion BiPac 8700AXL modem is generally accessed via 192.168.1.254

If the modem is in default mode the interface username/password will be admin/admin

Once logged in you will be redirected to the Device Information page, select Quick Start from the left hand menu

The Billion BiPac 8700AXL modem is suitable for ADSL and also Fibre to the Node (VDSL) connections with or without VLAN Tagging, please confirm your connection settings with Vonex staff before proceeding 

Configuring ADSL

Make sure that the Layer2 Interface is set to ATM

Then select to setup the modem Manually

Standard Vonex ADSL settings are as follows:
VPI: 8
VCI: 35
Protocol: PPPoE
Encapsulation: LLC SNAP

Enter the username and password and select Continue

Configuring VDSL (NBN FTTN, FTTB)

Make sure that the Layer2 Interface is set to PTM

Then select to setup the modem Manually

Enter the username and password and select Continue

Setting up VLAN Tagging

If your internet connection requires VLAN Tagging you will need to configure the following settings:

Configuration > WAN > WAN Service page
Find the PTM Interface and select Edit

Setup the following:
802.1P Priority: 1
802.1Q VLAN ID: 100

Disabling SIP ALG

We recommend that you disable SIP ALG within your modem by selecting:
Configuration > NAT > ALG
Set SIP to Disable and Apply

Setting Up WiFi

You will need to setup security for both 5G and 2.4G WiFi

Setting the Administrator Password

If you are not prompted at the beginning you will need to setup the Administrator Password to limit access to the modem interface