This guide details how to set up the TP-Link Archer VR1600v modem router for the following connection types: ADSL, Fibre to the Node, Fibre to the Building, Fibre to the Curb, Fibre to the Premises, HFC, and Fixed Wireless
The interface of the TP-Link Archer VR1600v modem is generally accessed via 192.168.1.1
You can also access the interface by http://tplinkmodem.net
Basic Setup
If the modem is in default mode it will prompt you to set up an interface access password
The TP-Link Archer VR1600v modem is suitable for ADSL and also Fibre to the Node (VDSL) connections with or without VLAN Tagging, please confirm your connection settings with Vonex staff before proceeding
Select the Internet than DSL from the left-hand menu
VDSL without VLAN Tagging
The below screen indicates Fibre to the Node/Building without VLAN Tagging
VDSL with VLAN Tagging
The below screen indicates Fibre to the Node/Building with VLAN Tagging
ADSL
The below screen indicates ADSL
Ethernet
The below screen indicates Ethernet (FTTP, HCF, Fixed Wireless)
Connection Type: PPPoE
Enter the username and password provided by Vonex and select Next
VoIP Setup
If you do have Vonex Hosted Voice and know your credentials you can set up your VoIP page as follows:
Phone Number: Your Hosted Voice Extension
Registrar Address: Your Hosted Voice Domain
Authentication ID: Your Hosted Voice Extension
Password: Your Hosted Voice password
Disabling SIP ALG
We recommend that you disable SIP ALG within your modem by selecting:
Advanced > NAT Forwarding
Un-tick SIP ALG and Save
Logistics
Comments